H07RN-F, H07BN4-F and H07RN8-F Rubber Round Cables

Heavy duty Rubber insulated flexible cable Type H07RN-F, H07BN4-F, H07RN8-F, DN-F for use in dry, moist or wet conditions, indoors and Outdoors. Withstand weather, oils & greases, mechanical and thermal stresses. Suitable for permanent submersion (AD8) in water.
Available in 1, 2, 3, 4 & multicore in size from 0.5 sq mm to 400 sq mm suitable for voltages upto 1000 Volts.

  • Conductor:High purity electrolytic grade bright annealed flexible bunched bare, copper conductor according to international standards like IS 8130, BS 6360, IEC 228 & VDE 0295.
  • Insulation:Oil & water resistant EI4 quality Elastomeric rubber.
  • Sheath:Tough & flexible EM2 quality Elastomeric rubber.
  • CENELEC HD 22.1.S2, BS 6007, DIN VDE 0282 Part 810, IEC 60245, CEI 20-19
  • 450/750 V
  • 3 KV
  • -400 C to 900 C
  • S07RN-F, A07RN-F, H07RN-F, S1BB-F, H07RN8-F, H07BN4-F, H07ZZ-F, H07BQ-F, S07RC4N8-F, S1RC4N8-F, AD8 , S1BC4B-F, S07BB-F, S1BC4N8-F, S1BN8-F, S1RN8-F,H07RN-F OR, 07BN2-F, UG7OR, RG7OR, NAUTILUS 500,
Core colors (For Asian, African Markets) (For European Markets) New colour code for European Markets
3 core  Red ,Yellow, Blue  Black, Blue, Brown  Brown, Black, Grey
4 core  Red ,Yellow, Blue, Green  Black, Blue, Brown, Green  4G: Brown, Black, Grey, Green/Yellow OR
4 C : Brown, Black, Grey, Blue
Sheath color: Choice of  Black  or Blue Choice of  Black  or Blue Choice of  Black  or Blue
   
   

3 CORE ROUND

No of conducters in
 cross-section
no of core x mm2
Mean insulation
thickness
mm
Outside diameter
 min.
mm
Outside diameter
max
mm
Max cond.
resistance
mm
3 G 1.5 0.8 9.6 12.5 12.1
3 G 2.5 0.9 11.5 14.5 7.41
3 G 4 1 13 16 4.95
3 G 6 1 14.5 20 3.3
3 G 10 1.2 20 25.5 19.1
3 G 16 1.2 22.5 29.5 1.21
3 G 25 1.4 26.5 34 0.78
3 G 35 1.4 29.5 38 0.554
3 G 50 1.6 34.5 44 0.386
3 G 70 1.6 39 49.5 0.272
3 G 95 1.8 44 54 0.206
3 G 120 1.8 47.5 50 0.161
3 G 150 2 52.5 66.5 0.129
3 G 185 2.2 58 71.5 0.106
3 G 240 2.4 65.5 81 0.0801
3 G 300 2.6 72.5 89.5 0.0641

4 CORE ROUND

No of conduct in
 cross-sectionno of
core x mm2
Mean insulation
thicknessmm
Outside diameter
 min.mm
Outside diameter
maxmm
Max cond.
resistance
mm
4 G 1.5 0.8 10.5 13.5 12.1
4 G 2.5 0.9 12.5 15.5 7.41
4 G 4 1 14.5 18 4.95
4 G 6 1 16.5 22 3.3
4 G 10 1.2 21.5 28 19.1
4 G 16 1.2 24.5 32 1.21
4 G 25 1.4 29.5 37.5 0.78
4 G 35 1.4 33 42 0.554
4 G 50 1.6 38 48.5 0.386
4 G 70 1.6 43 54.5 0.272
4 G 95 1.8 49 60.5 0.206
4 G 120 1.8 53 65.5 0.161
4 G 150 2 58.5 74 0.129
4 G 185 2.2 64.5 79.5 0.106
4 G 240 2.4 73 90 0.0801


Note:
Insulation thickness, Sheath thickness and overall dimensions are nominal values. The number of wires is approximate and strand diameter is nominal; they shall be such as to satisfy the requirements of conductor resistance as per IS 8130/1984, BS-6360, IEC-228 & VDE-0295.